1. Brekeke Product Name and Version:
Brekeke sip server 3.7.4.8
2. Java version:
3. OS type and the version:
windows 10
4. UA (phone), gateway or other hardware/software involved:
pjsip s,p phone, x-lite
5. Your problem:
I have a 2 sip server which connect to internet over firewall/NAT device. sip server 2 is behind checkpoint firewall, sip server 1 is behind the another brand firewall. And I have 2 sip phone which connect to internet over NAT(DSL modem or 4G modem) device. sip phones located separetly locations.
When sip phones call each other over sip server 2, everything works. if they call each other over server 1, 200 ok and ACK messages goes to wrong ip. sip phone 1 send invite message to server, server send this invite message to sipphone 2 . during calls, invite messages which comes from sip phones to server, are almost same. but sip server send this invite message to other phone, sip server 1 change invite message contact ip to its private ip , sip server 2 change invite message contact ip to its public ip. because of that, sip phone 2 try to send 200ok message to sip server 1 private ip address and sip server 2 public ip address. sip server 2 can get 200ok message but sip server 1 cannot get 200ok message. how can I solve this problem. both sip server version and configuration are same. Could I push sip server to use its public ip for invite message contact information.
PS: RTP packets goes over TURN server which connect to internet directly.
Brekeke sip server 3.7.4.8
2. Java version:
3. OS type and the version:
windows 10
4. UA (phone), gateway or other hardware/software involved:
pjsip s,p phone, x-lite
5. Your problem:
I have a 2 sip server which connect to internet over firewall/NAT device. sip server 2 is behind checkpoint firewall, sip server 1 is behind the another brand firewall. And I have 2 sip phone which connect to internet over NAT(DSL modem or 4G modem) device. sip phones located separetly locations.
When sip phones call each other over sip server 2, everything works. if they call each other over server 1, 200 ok and ACK messages goes to wrong ip. sip phone 1 send invite message to server, server send this invite message to sipphone 2 . during calls, invite messages which comes from sip phones to server, are almost same. but sip server send this invite message to other phone, sip server 1 change invite message contact ip to its private ip , sip server 2 change invite message contact ip to its public ip. because of that, sip phone 2 try to send 200ok message to sip server 1 private ip address and sip server 2 public ip address. sip server 2 can get 200ok message but sip server 1 cannot get 200ok message. how can I solve this problem. both sip server version and configuration are same. Could I push sip server to use its public ip for invite message contact information.
PS: RTP packets goes over TURN server which connect to internet directly.