Set innomedia 5531

1. Brekeke Product Name and Version:Brekeke SIP Server , Version 3.3.8.1

2. Java version:

3. OS type and the version:xp

4. UA (phone), gateway or other hardware/software involved:SIP phone 5531

5. Your problem:I can not set my sip phone 5531 innomedia to run with brekeke server
is any body knows how to set this phone to make it run???
I want to use it in my home network 192.168.0.1.
But It does not run.
Maybe I do not know how to set brekeke...
I do not understant anything.
By a ping the phones answers at 192.168.0.50.
I give it this ip fixed number.
after that*;;;; I do not know...

Hi,
Regarding sip server setup, you can see the manuals.

http://www.brekeke.com/support/sip_document.php

I have not used innomedia, but I think if it is based on SIP protocol it is no problem to run.

Best regards,
Brett

lepetitpoussin,
Did you create a user in the [User Authentication] page? set the same username and password in the phone?

Brett wrote:Hi,
Regarding sip server setup, you can see the manuals.

http://www.brekeke.com/support/sip_document.php

I have not used innomedia, but I think if it is based on SIP protocol it is no problem to run.

Best regards,
Brett

Thank you for your answer. I am studiing how to manage with it following your link.
And I think it does not work because I do not have any dial plan.
I want to do home network, between my two IP phones 5531.
So I cope with the configuration of the dial plan for a local and home network access

Haddas wrote:lepetitpoussin,
Did you create a user in the [User Authentication] page? set the same username and password in the phone?

Thank you for your answer.

Yes I did.
But the interface is very very simple.
You can only enter user and password for a PPPoE connexion.
Otherwise, you can just assing a name.
So I created a user with the same name and without any password.
But nothing....
It seems that MTA 5531 does all by itself but badly... lol.
http://innomedia.com.cn/manuals/MTA5531 ... 20v1.0.pdf

But I really think that I do something wrong.
It should work.
There is no reason... lol
Maybe I should sum up my configuration and do some printscreen.

Do you get any error message on the phone's screen?

Can you see REGISTER in the [Dial Plan]->[History] page?

Haddas wrote:Do you get any error message on the phone's screen?

Can you see REGISTER in the [Dial Plan]->[History] page?

I only have a small red led that indicates me the network does not run.
Nothing else....
This is very light

If you use another SIP client, such as X-Lite, can you register the client and make a call?

janP wrote:If you use another SIP client, such as X-Lite, can you register the client and make a call?

ah good idea.
So I tryed.
I have 2 pc on xp, put on each xlite and I confirm, I can do a call.
It works perfectly.
I think I understand some things.
I am gone try something else.
And we will see.
TCP protocol is important.
I will try also with UDP.
So I try to change few parameters, and X-lite stopped.
SO it seems that the configuration is very accurate.
And ... I am lost....

Maybe innomedia is using UDP instead of TCP, but I can not change this parameter....

Hi
Let you open the UDP port 5060 at the firewall running on the SIP Server's XP.
or let you disable the firewall while you are testing.

ambrosio wrote:Hi
Let you open the UDP port 5060 at the firewall running on the SIP Server's XP.
or let you disable the firewall while you are testing.

I tryed.
I think the problem is more about some values or options.
Nothing
i am at the same point
I did all my best

Is it possible to declare the mac address of the phone in a setting file manually.
It could be a solution for me?
What do you think about this proposal ?

Since X-Lite doesn't have the same issue, it seems Innomedia has the problem.

If you capture packets at the SIP Server's PC with Wireshark, can you see any SIP packets sent from Innomedia?

ambrosio wrote:Since X-Lite doesn't have the same issue, it seems Innomedia has the problem.

If you capture packets at the SIP Server's PC with Wireshark, can you see any SIP packets sent from Innomedia?

I try.ouhh I did not know this tool.
I have to understand it before using.
Humm humm. lol

SO there is an Explicit Congestion Notification.
But why ???
ARP, ICMP protocols, an it turns on itself with this. no more type... nothing more..


my server is 192.168.0.15 and SIP phone 192.168.0.20





703 329.041168000 192.168.0.20 192.168.0.15 ICMP 98 Echo (ping) request id=0x7613, seq=16128/63, ttl=64 (reply in 704)

883 392.106794000 192.168.0.15 192.168.0.20 ICMP 98 Echo (ping) reply id=0x7613, seq=17152/67, ttl=128 (request in 882)

912 445.060656000 Innomedi_e1:ae:60 IntelCor_44:1b:23 ARP 60 Who has 192.168.0.15? Tell 192.168.0.20

913 445.060669000 IntelCor_44:1b:23 Innomedi_e1:ae:60 ARP 42 192.168.0.15 is at 00:21:5c:44:1b:23

1013 570.183710000 25.29.109.244 255.255.255.255 UDP 505 Source port: nfs Destination port: ew-disc-cmd

1086 690.208555000 192.168.0.15 255.255.255.255 UDP 505 Source port: rich-cp Destination port: ew-disc-cmd

can you capture packets while sip phone 192.168.0.20 is sending sip packets?

janP wrote:can you capture packets while sip phone 192.168.0.20 is sending sip packets?

AS I did, I think that I can not.
but maybe there is another way to do ?
I do not know

If you can not see any SIP packet sent from the innomedia, it means the phone has the problem.
Contact their tech support.

ambrosio wrote:If you can not see any SIP packet sent from the innomedia, it means the phone has the problem.
Contact their tech support.

Oh I am happy, because I can not see any SIP packet.
I thought I should hihihihi.
So it means, it is right.
So what should I do.
Proposal 1, I think I am gooing to buy a innomedia SIP server that I could set to any asterix or brekeke server.

proposal 2, try more ... lol

Does the Innomedia 5531 support SIP??
Update phone's firmware.

Let you try UDP for SIP at first.

taitan wrote:Does the Innomedia 5531 support SIP??
Update phone's firmware.

Let you try UDP for SIP at first.

indeed I tried amsp this solution, but I do not have any display to upgrade the firmware.
About UDP I tried also all.... that is why I feel so .... . Whatever...


I am waiting for an innomedia server. I think it will fit.
I will program the netwok by this server.
I keep you in touch when I test it.