Problems with ARS to a specific carrier

1. Brekeke Product Name and Version: PBX 3.2.3.6
2. Java version:
Open JDk 7

3. OS type and the version:
Ubuntu

4. UA (phone), gateway or other hardware/software involved:
Cisco or Huawai SBC
5. Your problem:
the PBX sends all registers to itself if I use the uri: sip:username@carrier.sip

It ignores the hostfile.

is there a workaround so It doesn't try to register to itself when i use a internal domain instead of an IP-address

Try Oracle JDK instead of OpenJDK.
Make sure you uninstall OpenJDK completely.

Sorry but I don't think that this is a openJDK Problem.
The logs show any java errors.

If this is carrier class software It should support the more stable version of java for linux systems.

Sun Java makes always more problems than it solves.

Is there a possibility to give brekeke a host list?

Edit: the pbx seems to not resolve a dns name. I captured a lot of packets only if I wok with IP-Addresses the pbx starts sending packets via LAN port

can you ping to this internal domain name from command line?
what IP is shown from the above ping result?

Have you restarted the PBX after you edited the hosts file?

In my experience, combination of Ubuntu and OpenJDK bring some problems.
For example, OpenJDK/Ubuntu has the bug in TLS handling.
https://bugs.launchpad.net/ubuntu/+sour ... bug/948875

Also, Brekeke recommends Oracle JDK.
http://wiki.brekeke.com/wiki/Brekeke-SI ... ew-install

If you want to provide a stabler service, stop using OpenJDK.

farndt,

Have you defined the ARS like the following?
-----------
[Register URI] = sip:&v1@carrier.sip
[Proxy Address] = 1.2.3.4 (let you put the actual IP address)
-----------

Hello,

It works with the IP-address after, the carrier changed the sbc configuration. I don't have problems with other providers.

If you use a linux operatingsystem you use openJDK, because oracle Java issn't in the packet repository.

I use Brekeke PBX and Sip-server with no visible problems with openJDK. I could recommend it. Woks stable till 15.000 active sessions.

Oracle java is a pain with debian, sorry.

Most company's didn`t support openJDK because the have to test twice and there are no windows binary. If you sell a server product so make a installer and bunde everything or make it work with both.


Sorry for the post, sip-server and pbx are great products but to only support oracle java isn't state of the art.

Hi farndt, Thank you for the reply.
I will try OpenJDK for Brekeke!