1. Brekeke Product Name and version:
Brekeke SIP Server 2.4.8.6/286.3
2. Java version:
1.6.0_26
3. OS type and the version:
Windows Server 2008 R2 6.1
4. UA (phone), gateway or other hardware/software involved:
X-lite and LYNC Client
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :
pattern 7
6. Your problem
Brekeke server is talking to an dual nic SBC, which in turn is talking to a Lync Mediation server. Whenever the LYNC clients calls the x-lite client(registered on the Brekeke SIP Server), the call goes fine. But when LYNC Client tries to put the call on hold, by sending a=inactive in the re-invite, Brekeke server responds back with lack of "a" parameter, which by default means a=sendrecv. Due to which the call could not be put on hold. How can i manipulate the dial plan, so that the BSS responds with a=inactive for the re-invite.
Brekeke SIP Server 2.4.8.6/286.3
2. Java version:
1.6.0_26
3. OS type and the version:
Windows Server 2008 R2 6.1
4. UA (phone), gateway or other hardware/software involved:
X-lite and LYNC Client
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :
pattern 7
6. Your problem
Brekeke server is talking to an dual nic SBC, which in turn is talking to a Lync Mediation server. Whenever the LYNC clients calls the x-lite client(registered on the Brekeke SIP Server), the call goes fine. But when LYNC Client tries to put the call on hold, by sending a=inactive in the re-invite, Brekeke server responds back with lack of "a" parameter, which by default means a=sendrecv. Due to which the call could not be put on hold. How can i manipulate the dial plan, so that the BSS responds with a=inactive for the re-invite.