Brekeke PBX Trunk to Brekeke PBX

1. Brekeke Product Name and version:2.4.3.9

2. Java version:

3. OS type and the version: Windows 2003

4. UA (phone), gateway or other hardware/software involved:

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :

6. Your problem:
How to connect between Brekeke PBX to Brekeke PBX for client can call from PBX1 to PBX2

for user at pbx1 call to pbx2
at pbx1 use ARS to register pbx1 as a user to pbx2 and create pattern-out to send call to pbx2 ip address if dialing numbers a certain prefix or pattern
for setup ars on pbx 1, copy the sample ARS rule for ITSP at pbx/ARS/settings

and do the same setup at pbx2 for calls from pbx2 users to pbx1

I try to configure but not work.

Step 1 ==> In PBX2 Create SIP Account for PBX1.
Step 2 ==> In PBX1 Create ARP to register PBX2.
Step 3 ==> Creat pattern-out to send call to PBX2.

can you see pbx1 register record at pbx2/sip server/registered clients?

at pbx2, create pbx user with the same name as pbx1 regisetered id
at pbx1/ ars/pattern-out, set
pattern-out add the following setting
matching pattern
From: sip:pbx1_registerID@pbx2_IP

if not work, please capture packets and pbx1 or pbx2
and check what response from pbx2