Ondo PBX on server with 2 NICs

1. Brekeke Product Name and version: 2.4.3.9

2. Java version: 1.6.0_18

3. OS type and the version:
windows 2007 server

4. UA (phone), gateway or other hardware/software involved:
XLITE

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :
Pattern 6

6. Your problem:

The server has two NICs. The NIC1 has public IP (190.x.x.x) and other NIC2 has private IP (192.168.x.x). The UA like XLITE connects to NIC2 without problems. This server is configured to connect to with sip provider but use the NIC2 to register. The problem is that 1) the sound is only one way 2) why the server register on sip provider using NIC2 instead NIC1?

Can you see both interface IP addresses in the [Status] page of the SIP Server?
If not, add both interface addresses in [interface] settings.

yes, I can see both IP addresses in status page.

let me know NIC2's private IP address.

also.. do you have any dialplan rules?

we don't any dialplan in sip server own only there are pbx's dialplan default. We only have an ARS defined on PBX to connect to voip service provider and it register with using IP 192.168.0.x

Public NIC1 : 190.188.x.x
Private NIC2: 192.168.0.y

All UA like X-LITE are connected to Private NIC2

Soylo

umm.
what is the provider's IP address?

The provider IP address is 190.188.x.x a public IP without NAT.

But I want to know why the Ondo PBX use the private IP address instead than Public IP address.


Soylo

Did you set the provider's IP address in ARS?
Are you sure you set 190.188.x.x there ?

taitan wrote:Did you set the provider's IP address in ARS?
Are you sure you set 190.188.x.x there ?

Yes. I did set the ip provider 72.x.x.x in ARS. The NIC1 of the Server PBX has 192.188.x.x.

How you know in ARS you have to set the provider's IP. The PBX is register with provider usin NIC2 private IP.

The question is Why the PBX use the NIC2 instead NIC1?

Soylo

>> The NIC1 of the Server PBX has 192.188.x.x.

Is NIC1 190.188.x.x ? right?


If you send a ping to 72.x.x.x, which NIC is used?

taitan wrote:>> The NIC1 of the Server PBX has 192.188.x.x.

Is NIC1 190.188.x.x ? right?


If you send a ping to 72.x.x.x, which NIC is used?

If I send a pin use NIC 1. the NIC2 has not default gateway.

I noted that if the NIC1 is set to 190.188.x.x the ondo PBX use this ip when register. But when the NIC1 has 200.35.x.x the PBX use the NIC2 (192.168.x.x). WHY?

are you using licensed version?
which edition are you using?

No. I am using trial version of Ondo PBX Pro Edition v2.4.3.9. We are testing before buy.

Can you capture packets?
Send packets to Brekeke's team and request analysis.