How to set-up Brekeke to answer at the "OPTION" Re

1. Brekeke Product Name and version:
2.4.3.9

2. Java version:
1.6.0_18

3. OS type and the version:
Windows XP Professional

4. UA (phone), gateway or other hardware/software involved:
Xlite as Sip Phone

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :

6. Your problem:
Good morning.

I set up a lab environment where the Brekeke Sip Proxy register either a Xlite sip phone and 3 Pots line configured in a property Alcatel card that , with registration , generate Pots Tone on the registered line, for analog phone.
The problem is that the card is always sending an option request , for each pots line configured , and the Proxy answer always to them with a Not Found frame.
Thus the pots user is always hearing the fast busy tone , as soon as off-hook to make any new call , below the option frame :

Via: SIP/2.0/UDP 151.98.244.245:5060;branch=z9hG4bK930301323-38635226
Route: <sip:151.98.244.252:5060;lr>
Max-Forwards: 70
Supported: 100rel
From: <sip:64270@151.98.244.252;user=phone>;tag=ICF_930317827-38635227
To: <sip:151.98.244.252:5060;transport=udp>
Call-ID: 930278054-38635225
CSeq: 1 OPTIONS
Contact: <sip:64270@151.98.244.245:5060;transport=udp>
P-Preferred-Identity: <sip:64270@151.98.244.252;user=phone>
Allow: INVITE,ACK,CANCEL,BYE,OPTIONS,UPDATE,INFO,NOTIFY,PRACK
Content-Length: 0



And the “Trying” and “Not Found” Brekeke answer frame :


SIP/2.0 100 Trying
Via: SIP/2.0/UDP 151.98.244.245:5060;branch=z9hG4bK930301323-38635226
From: <sip:64270@151.98.244.252;user=phone>;tag=ICF_930317827-38635227
To: <sip:151.98.244.252:5060;transport=udp>
Call-ID: 930278054-38635225
CSeq: 1 OPTIONS
Server: Brekeke SIP Server rev.286 Evaluation
Content-Length: 0

SIP/2.0 404 Not Found
Via: SIP/2.0/UDP 151.98.244.245:5060;branch=z9hG4bK930301323-38635226
From: <sip:64270@151.98.244.252;user=phone>;tag=ICF_930317827-38635227
To: <sip:151.98.244.252:5060;transport=udp>;tag=b19544cf8s
Call-ID: 930278054-38635225
CSeq: 1 OPTIONS
Server: Brekeke SIP Server rev.286 Evaluation
Content-Length: 0

So my question is , is there any option or any possibility on the Brekeke to answers at this requests.

Best Regards

Alessandro

Are you using Brekeke PBX?
It seems you are using Brekeke SIP Server not Brekeke PBX..

> So my question is , is there any option or any possibility on the
> Brekeke to answers at this requests.

Try the DialPlan rule below.
It returns "200 Ok" to OPTIONS requests.
---------------------------
[Matching Patterns]
$request = ^OPTIONS

[Deploy Patterns]
$response = 200
---------------------------