Brekeke SIP Trunk & OCS 2007 R2 configuration

1. Brekeke Product Name and version: 2.3.6.0
2. Java version: 1.6.0 Update 13
3. OS type and the version: Windows 2008 x64
4. UA (phone), gateway or other hardware/software involved: ITSP & OCS 2007 R2
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html : Pattern 8
6. Your problem:

Need help configuring my SIP Trunk provider in Brekeke.

I have been provided a SIP Server of "nsw.nexvoice.net.au" and a username and password.

I configured the server address in the upper registra address field, but i dont know how to authenticate to my provider, nor does it say anywhere that is has successfully authenticated to my provider, also how do i route all the calls to my ocs box.

my server ip's are as follows

Mediation Server: 10.6.0.3
Brekeke Server: 10.6.0.4

my number range is 0280883000 to 0280883099 which gives me 100 numbers.

http://wiki.brekeke.com/wiki/Brekeke_PB ... rosoft_OCS

Thanks for that, but you still havnt answered my question on how to configure my sip trunk and confirm that it has successfully registered with my sip provider.

Use Brekeke PBX instead of Brekeke SIP Server and set your account information at PBX's ARS settings.

Brekeke SIP Server will not be fit in your scenario.