ITSP Toplink

1. Brekeke Product Name and version:
Brekeke PBX, Version 2.2.6.2 , Basic

2. Java version:
jre6

3. OS type and the version:
SBS 2008

4. UA (phone), gateway or other hardware/software involved:

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :

6. Your problem:

How can I register the ITSP Toplink (Germany) and what for a dial plan I have to configure? I hope anyone has a solution...

Best regards

Serhat

hi,

use ARS in the PBX. you don't have to use DialPlan for register.

other ITSP sample settings may help you.
http://www.brekeke-sip.com/wiki/index.p ... i=fe3ca084

okay, I'm using ars, but what is with the other configuration? I get a registration to the ITSP and when I make a call intern/extern the call goes directly to the voicebox (voicebox is deactivated). I don't get a ring? All the settings I have tested but do not come further!

SIP server -> system configuration:
- which settings should be in the system (network interface)?
- External IP address pattern?
- UPnP?
- etc...

SIP server -> system SIP:
- Nat Traversal?
- Authentication?
- Upper Registration?
- etc...

PBX -> Options Settings:
- SIP settings?
- etc...

must I configure pattern in/pattern out on the ARS?

Thanks for your help

nobody an idea?

Since you already registered to the ITSP, you don't need any configuration in the SIP Server.


Did you make a user in the PBX?
If you don't yet, you need to make users in the PBX.
And then you need to register your SIP client in the SIP Server.

I solved it alone...

thanks.

That's nice!