Forums Read-only archive

connect to sip provider

4 posts · Brekeke PBX Forum

pel-ee Original post
1. Brekeke Product Name and version:
Brekeke PBX 2.2.6.2

2. Java version:

3. OS type and the version:

4. UA (phone), gateway or other hardware/software involved:

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html : Pattern 8

6. Your problem:

Hello!
We have a problem.
I'm trying to connect with sip provider. I prescribed the port forwarding on the NAT for sip and rtp traffic, as write in the instructions "How to set port forwarding?"
I have a problem, when I change ip address in the field of PBX SIP Server> Config> System> Network Interface Address on global ip our router.
When I restart pbx, phones have been registered in the pbx among themselves do not want to call (error 486 - busy here)
I use the trial version, it may be the cause of this problem?
If not, how could you help to solve this problem?
Thanks
taitan
Which OS are you using?
Which IP address can you see in the "Interface" field on the front page?
pel-ee
taitan wrote:Which OS are you using?
Which IP address can you see in the "Interface" field on the front page?
I use OS Ubuntu 8.10
In the field "Interface", I see a global ip address of the router.

small correction, the error is not 486. Error is 483 (Too Many Hops)
taitan
It seems /etc/hosts doesn't have "localhost" information..
You need to edit /etc/hosts correctly..

OR, Add your computer's IP address in the Serrver's Interface settings (e.g. as "Interface address 2").