1. Brekeke Product Name and version: Brekeke PBX, Version 2.2.6.2 , Pro Evaluation and Brekeke SIP Server for Brekeke PBX, Version 2.2.6.2
2. Java version:Ver 6 Update 11
3. OS type and the version: Windows XP Service pack 3
4. UA (phone), gateway or other hardware/software involved:
x-lite version 3.0 and Intel Dialogic HMP version 3.0
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html : 1
6. Your problem: I need to handle direct and diverted calls in my IVR. Direct calls are working, but for diverted calls, the Brekeke pbx was not passing Diversion information in the SIP header.
I found this link relating to adding the Diversion header as a dial plan
http://www.brekeke-sip.com/bbs/viewtopi ... 3f495a9f6b
When I add this entry to the dialplan then diverts are working perfectly, but direct calls no longer work (everything is automatically diverted).
What I really want to do is have Direct calls automatically divert to a known extension after a certain period of time (say 5 seconds).
It is most likely a config issue regarding dial plan settings to get the pbx to do normal direct calls, then switch to the divert dialplan after 5 rings - however I am still new to Brekeke and dial plans, so any advice would be much apreciated.
Many thanks,
Andy
*** Edit ***
For information, I tried the normal divert on no answer for an extension, which is where I discovered that the Diversion header was missing. Then I tried the dialplan approach as described above and ran into the "always divert" issue.
2. Java version:Ver 6 Update 11
3. OS type and the version: Windows XP Service pack 3
4. UA (phone), gateway or other hardware/software involved:
x-lite version 3.0 and Intel Dialogic HMP version 3.0
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html : 1
6. Your problem: I need to handle direct and diverted calls in my IVR. Direct calls are working, but for diverted calls, the Brekeke pbx was not passing Diversion information in the SIP header.
I found this link relating to adding the Diversion header as a dial plan
http://www.brekeke-sip.com/bbs/viewtopi ... 3f495a9f6b
When I add this entry to the dialplan then diverts are working perfectly, but direct calls no longer work (everything is automatically diverted).
What I really want to do is have Direct calls automatically divert to a known extension after a certain period of time (say 5 seconds).
It is most likely a config issue regarding dial plan settings to get the pbx to do normal direct calls, then switch to the divert dialplan after 5 rings - however I am still new to Brekeke and dial plans, so any advice would be much apreciated.
Many thanks,
Andy
*** Edit ***
For information, I tried the normal divert on no answer for an extension, which is where I discovered that the Diversion header was missing. Then I tried the dialplan approach as described above and ran into the "always divert" issue.