REFER problem

1. Brekeke Product Name and version:
BSS 2.2

2. Java version:
1.5

3. OS type and the version:
Windows 2003

4. UA (phone), gateway or other hardware/software involved:
x-lite and Microsoft OCS and bandwidth.com trunk.

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :
8

6. Your problem:
I have Microsoft OCS <--> BrekekeSIP (new beta) <--> bandwidth.com trunk. There is no firewall and all IPs are public. Call comes into MOCS and it is answered properly. After a few IVR steps, MOCS issues a blind tranfer (REFER). This REFER is directed to a x-lite softphone that is regiested and is visible under User Registrations. What I would like is for BSS to issue an INVTIE to x-lite phone and not forward REFER request to bandwith.com (they don't support refers). Plus even if they did, I really want BSS to bridge the audio and to server as a b2bua of kind. I have set the bc2bua setting in my advanced settings but I cannot seem to get that to work.

Thank you.

Are you using Brekeke PBX?
If not, try the Brekeke PBX because it works as a B2B-UA.
In my environment, I'm using Brekeke PBX and SIP Server as a bridge between OCS and ITSP.

Can Brekeke SIP Server do call transfer or do we need to have Brekeke PBX along with SIP Server for call transfer . I am trying to do blind transfer with Brekeke SIP Server.
My call pattern is Allworx(192.168.0.150)--Brekeke SIP Server(192.168.0.36:5060)--Speech Server(192.168.0.36:6010)--Brekeke SIP Server--Allworx(Blind transfer to extension 111)

wireshark is provided below. I dont understand what is going wrong.

1300 13.976384 192.168.0.36 192.168.0.150 SIP Request: REFER sip:+1111@192.168.0.150:5060;transport=udp
1301 13.978055 192.168.0.150 192.168.0.36 SIP Status: 100 Trying
1305 14.028848 192.168.0.150 192.168.0.36 SIP Status: 202 Accepted
1307 14.050011 192.168.0.150 192.168.0.36 SIP/SDP Request: INVITE sip:+1111@192.168.0.36:5060, with session description
1308 14.050478 192.168.0.36 192.168.0.150 SIP Status: 100 Trying
1310 14.054140 192.168.0.36 192.168.0.150 SIP/SDP Request: INVITE sip:111@192.168.0.150, with session description
1311 14.056121 192.168.0.150 192.168.0.36 SIP Status: 491 Request Pending
1312 14.057186 192.168.0.150 192.168.0.36 SIP/sipfrag Request: NOTIFY sip:+10042@192.168.0.36:5060, with Sipfrag(SIP/2.0 200 Ok)
1313 14.060858 192.168.0.36 192.168.0.150 SIP Status: 491 Request Pending
1314 14.060888 192.168.0.36 192.168.0.150 SIP Status: 200 OK
1315 14.061247 192.168.0.36 192.168.0.150 SIP Request: BYE sip:+1111@192.168.0.150:5060;transport=udp
1316 14.062936 192.168.0.150 192.168.0.36 SIP Request: ACK sip:+1111@192.168.0.36:5060
1317 14.063390 192.168.0.36 192.168.0.150 SIP Request: ACK sip:111@192.168.0.150
1318 14.066664 192.168.0.150 192.168.0.36 SIP Status: 200 Ok
1319 14.082784 192.168.0.36 192.168.0.161 RTCP Sender Report Goodbye
1320 14.084298 192.168.0.161 192.168.0.36 ICMP Destination unreachable (Port unreachable)

If you want to use a transfer by REFER, you need to use BREKEKE PBX instead of BREKEKE SIP SERVER.

You can download it.
http://www.brekeke.com/download/downloa ... _trial.php

so,do you mean Brekeke SIP Server do not support REFER method.

Hi

Brekeke SIP Server is a SIP proxy.. so it can handle a REFER as well as another SIP request. but it can not make a transfer by REFER.

Brekeke PBX can accept REFER and handle a transfer.