Brekeke and 3CX Connection

1. Brekeke Product Name and version:
Brekeke SIP Server for Brekeke PBX, Version 2.1.6.6

2. Java version:
1.5.0_14

3. OS type and the version:
Windows 2003 R2

4. UA (phone), gateway or other hardware/software involved:
3CX

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :
Pattern 9

6. Your problem:
I am tring to connect 3CX to Brekeke PBX.
UA connected to 3CX and using Brekeke to make the final termination to land/cell number.

what is happening is that the call goes as far as ring and when answerd the call drops.

Hi,
Which audio codec did you use?
Can you see any error message at [Active Sessions] page?

James,

i am using uLaw.
I onle see the STUN error, and i tried to disable this, but the error jsut keeps coming up.

this is what i am getting on the status page

14:11:07.092 StratLink::onHangUp [CM104001] Call(23): Ext.10003 hung up call; cause: unknown
14:10:35.061 CallLegImpl::onConnected [CM103001] Call(23): Created audio channel for Ln:10001@DataWorld (209.208.XXX.XXX:10016) with Media Server (138.210.XXX.XXX:9032)
14:10:35.045 StratInOut::onConnected [CM104005] Call(23): Setup completed for call from Ext.10003 to Ln:10001@DataWorld
14:10:35.045 CallLegImpl::onConnected [CM103001] Call(23): Created audio channel for Ext.10003 (192.168.2.108:42750) with Media Server (138.210.XXX.XXX:7044)
14:10:34.045 MediaServerReporting::STUN [MS101003] Call(23) Ln:10001@DataWorld: Possible firewall problem. Address mapping failed on STUN server 138.210.XXX.XXX:3478 for local address ":9032"
14:10:33.873 CallConf::onIncoming [CM103002] Call(23): Incoming call from 10003 (Ext.10003) to sip:9800@138.210.XXX.XXX

Can you capture the packets using WireShark?