Can't receive calls from PSTN

1. Brekeke Product Name and version: OnDO PBX SmallOffice Ed. 1.5.3.0

2. Java version: 1.5.0 (build 1.5.0_11-b03)

3. OS type and the version: Windows XP (SP2)

4. UA (phone), gateway or other hardware/software involved: Grandstream BT-200

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html : 8

6. Your problem: followed instructions of how to setup a DID at your interoperability section but no success on receiving calls from PSTN. Checked PBX logs and error code 407 found.

I think you need to add a dialplan to accept a call from the PSTN.

Which provider are you using?

I am using our own ITSP. I already put a dialplan before 'To PBX' default one like this:

Matching Patterns
$addr=^69\.1\.229\.
$request=^INVITE
to=(.*)

Deploy Patterns
$target=localhost:15060
To=%1
$auth=off

Do you have any other dialplan rules before the above dialplan?
If so, please disable them.

Are you sure 69.1.229.x is the ITSP's IP address?

Here is the thing: if we register at our main proxy (abroad) it works fine but, if we register at a nearer one (BSS 2.1 acting as a RTP media relay server for the the main proxy) , it doesn't. Even if we change IP address at the dialplan above. Any suggestion?

Hey! I was using above Dial Plan with PBX version 2.2.6.2 for DID incoming calls without hassles. After upgrading to 2.2.7.8 it stops working . I also noticed that newer version has a new Dial Plan called 'To PBX From ITSP'. I tried to disable it without success. Any idea what is happening?

See http://wiki.brekeke.com/wiki/BPBX_History

It said the following at 2.2.7.8.
- Default values of authentication for REGISTER and INVITE are "on"

So you need to disable authentication at config settings.
-OR-
Set $auth=off at the DialPlan for ITSP.


See http://wiki.brekeke.com/wiki/Security for more details.

You need to create new ARS that has both of IN/OUT pattens with empty fields .