Forums Read-only archive

Auto-attendant cannot hear DTMF from Quintum

8 posts · Brekeke PBX Forum

michaelkoh Original post
1. Brekeke Product Name and version: SIP PBX v2

2. Java version:

3. OS type and the version:

4. UA (phone), gateway or other hardware/software involved:

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :

6. Your problem:

I have Quintum connected to the SIP PBX.

I have setup the AA at SIP PBX at 100. When I use a SIP phone to dial 100, during listening to the prompt, I can dial extension 601 and the call is transferred.

When I call into the SIP PBX via quintum CO trunk, during listening to the AA prompt, the DTMF has no effect. The AA prompt continues to play, and does not hear my DTMF?

What did I miss out? Thanks.
peng
Echo canceler of a sip device sometimes causes a problem with dtmf.
What if you set SIP-INFO or RFC2833 at Gateway?
michaelkoh
peng wrote:Echo canceler of a sip device sometimes causes a problem with dtmf.
What if you set SIP-INFO or RFC2833 at Gateway?
What value should I set them?
michaelkoh
peng wrote:Echo canceler of a sip device sometimes causes a problem with dtmf.
What if you set SIP-INFO or RFC2833 at Gateway?

Thank you so much....we set to In-band. Problem solved!
michaelkoh
hmmm..... the problem comes back again.... I now cannot detect the dtmf at the autoattendant from external call.
peng
what version of PBX are you using ?
What if you set SIP-INFO at Gateway?
michaelkoh
version 2.

Perhaps if you can tell me exactly where do I set that SIP-INFO at quintum?

Thanks.
peng
Sorry, michaelkoh.
I don't know about quintum. Just I tought it might work if you could
set SIP-INFO or RFC2833 to that.