1XX 200 Request not send and blocked by Brekeke

1. Brekeke Product Name and version: 2.0.7.2 Evaluation

2. Java version:

3. OS type and the version: XP

4. UA (phone), gateway or other hardware/software involved: Basic softphone

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :

6. Your problem:
I have just installed Brekeke SIP server. The registration of my 2 UA are OK but the problem is to make a call.
The INVITE is well relayed by brekeke which sends it to the right UA. Unfortunatly, when this UA sends in response 100 - 180 - 200 methods, they arrived at the brekeke server but it doesn't send it to the UA (They are blocked). I have seen my packets with Wireshark and they seems good (The via with the UA to reach is in the responses )
Does anyone have an idea how to deal with this problem ???
Thank You.

Does your sip server have two or more ipaddresses ?
I want to see the packet that come from the callee.
So paste the packets here.

The brekeke server has only one ip addresse. All is done in a local network.

Here is what I have with wireshark:

UA1 (brekeke) UA2
192.168.1.1 192.168.1.50 192.168.1.160

5060 <----INVITE----- 5060
5080 <----INVITE---- 5060

5080 ----200 OK----> 5060 (blocked)

Two via are in the 200 OK and they are correct to route the packet.
I simply don't understand why brekeke blocks the 200 OK.

I face the same problem, but with the higher number of users, some of my users working fine, but some other not ringing but registering ok and can call from it normally.

I never faced a problem like this, even with more number of users.
And one more think what is the IP address of UA1 (is it 192.168.1.1 ??)
ONDO is used to change the network address (like 192.168.XXX.1) to loop back address.

assign some other ip address to UA1 (192.168.1.150) and check