VAD , Silence Suppression with AS5300

1. Brekeke Product Name and version:

Brekeke OnDO PBX SmallOffice Edition Version 1.5.3.0

2. Java version:

java-ver 1.5.0_06

3. OS type and the version:

os-ver 2.6.9-42.0.3.ELsmp

4. UA (phone), gateway or other hardware/software involved:

Grandstream BT-100 , AS5300

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :9

6. Your problem:

Hello. I have a problem.

I used GrandStream BT-100 with Brekeke via AS5300.

I have no sound part cuts at the voice call.

no sound part RTPs as follows.

source----------destination--------protocol---Info
203.X.X.XX-----192.168.1.123----UDP-------src port:5004 dst port : 10230
192.168.1.123--203.X.X.XX-----UDP-------src port:10230 dst port : 5004
203.X.X.XX-----192.168.1.123----UDP-------src port:5004 dst port : 10230
192.168.1.123--203.X.X.XX-----UDP-------src port:10230 dst port : 5004
203.X.X.XX-----192.168.1.123----UDP-------src port:5004 dst port : 10230
192.168.1.123--203.X.X.XX-----UDP-------src port:10230 dst port : 5004
203.X.X.XX-----192.168.1.123----UDP-------src port:5004 dst port : 10230
192.168.1.123--203.X.X.XX-----UDP-------src port:10230 dst port : 5004
(no sound part)
192.168.1.123--203.X.X.XX-----UDP-------src port:10230 dst port : 5004
192.168.1.123--203.X.X.XX-----UDP-------src port:10230 dst port : 5004
192.168.1.123--203.X.X.XX-----UDP-------src port:10230 dst port : 5004
192.168.1.123--203.X.X.XX-----UDP-------src port:10230 dst port : 5004
192.168.1.123--203.X.X.XX-----UDP-------src port:10230 dst port : 5004
192.168.1.123--203.X.X.XX-----UDP-------src port:10230 dst port : 5004
192.168.1.123--203.X.X.XX-----UDP-------src port:10230 dst port : 5004
192.168.1.123--203.X.X.XX-----UDP-------src port:10230 dst port : 5004
192.168.1.123--203.X.X.XX-----UDP-------src port:10230 dst port : 5004

203.X.X.XX is OnDO.
AS5300 VAD is no.
BT-100s silence sup is no.
codec G711u.

please tell me the solve this problems.

Hi,

The bt-100 is behind a router right? Ondo is on the internet at another location? You can not hear anything coming from Ondo? Can Ondo hear you? Is rtp relay set to on and nat traversal set to on on the sip server? Are udp ports 10000-10999 open on the linux firewall where Ondo is?

hello.very thanks to your responce.

>The bt-100 is behind a router right?
yes.

>Ondo is on the internet at another location?
yes. Ondo has global address.

>You can not hear anything coming from Ondo?
> Can Ondo hear you?
yes. completely silence come sometimes.
but caller start talking, sound is comming.
and caller stop talking,sound is completely stop.
Our staff feel "disconnect network ??" but network is fine.
It's like VAD function.

>Is rtp relay set to on and nat traversal set to on on the sip server?
yes

>Are udp ports 10000-10999 open on the linux firewall where Ondo is?
yes.

Brekeke doesn't introduce VAD so one of your two devices is most likely not functioning correctly. I would make sure you upgrade to the newest firmware on the Grandstream units.